How To Build A Portable Changing Room

How To Build A Portable Changing Room 1

A portable changing room can be an amazing asset to any fashion supplier who attends and participates in expos or fairs. Like a Vault Denim Fashion Consultant, I have found that having a way for my customers to try on the jeans is vital to my success at any show! I made a portable changing room with a PVC pipe frame that is easy to create and in the same way easy to break down! It was the perfect solution!

While it could look complicated and even “sound” complicated, it really is very simple. I managed to buy the materials, make necessary adjustments, put everything together, and even sew the drapes within a few short hours one afternoon! That was all done from a vision I had formed in my head! Hopefully with the instructions right here, you’ll be able to make your own changing room in an easier manner! The first step is to begin with a plan. What do you need your portable changing room for? Is it for a business expo for your business or could it be for camping?

Make it fit your need. I needed one suitable for trying on denims. I decided that my changing room would be about 3 feet rectangular and about 6 feet tall. It would have to be tall enough that a lot of people could not look down into it, but most women are under 6 ft tall, so that it would feel private enough.

The next step was to break it down and figure out the frame. I wanted the fabric curtains to be made of denim (just made sense selling jeans!) therefore the frame would need to be solid enough to support the weight of the fabric. Several sketches later an idea was got by me for a body and I am going to the neighborhood lumberyard!

I went to the Joplin Home Depot and began gathering fixtures and PVC tube. They were amazing and even slice the pipe to match for me! I made several adjustments later at home and trimmed in the pieces with a hacksaw in only minutes. I used 1-inch diameter PVC pipe.

It was a bit stronger in support of pennies more, definitely worth the money! The fittings were a little more expensive, but again the stability of the changing room was worth the added investment. Start by trimming off about 1 in. From each of 4 of the 12-inch pieces. This will give you 4 – 11-inch pieces.

  • Employer payroll taxes
  • Fix the usability issues that confuse everyone
  • 20 2012”, and
  • Knowledge of Windows, Web-based and MS Access applications
  • Event Planner Template
  • Ability to gain access to non-competitive bid opportunities for buys under $10,000
  • Amex/Diners need to apply individually and cost more

This permits the extra inches added by the added fitting in the back panel. It’s important to keep the height of most four sides equivalent. You will cut 4 pieces right down to 2 feet each also. These will be placed with the 11-inch pieces in the back frame.

It does indeed all go collectively correctly! The added pubs in the comparative back lends added power to the frame. Once that is done, use either sandpaper or a metal file to smooth the edges on the pipe. This is needed for the soft piecing together and taking apart of the pieces. Test each end into a fitting until it goes in and comes out smoothly.

When establishing at a show, you will be glad you took the time for this vital step! Start by piecing the back panel and then the entrance panel collectively. Next lay the trunk panel on the floor and work from the ground up and place the medial side posts into the frame. Place the front panel on and snap into place.